Kia Rio: Fuel Pump Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Rio UB 2012-2024 Service ManualKia Rio: Fuel Pump Installation

1.
Installation is reverse of removal.

Fuel pump plate cover installation bolt :
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.44 ~ 2.17 lb-ft)


     
Be careful of fuel pump direction when installing.
Fuel Pump Removal
1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

Fuel Pump Inspection
[Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembly. ...

See also:

Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm. 3. Install the lower and upper linkage to the wiper motor ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS termi ...

Power Door Lock Switch Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

Copyright © www.kirmanual.com 2014-2024