Kia Rio: Fuel Tank Air Filter
Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Lift the vehicle.
|
| 3. |
Disconnect the canister close valve connector (A).
|
| 4. |
Disconnect the ventilation hose (B) from the fuel tank air filter
and canister close valve.
|
| 5. |
Remove the fuel tank air filter assembly after removing a bolt
(A).
|
| 6. |
Remove the bracket (A) after pulling it.
|
| 7. |
Release the lever (A), and then separate the canister close valve
(B) from the fuel tank air filter (C) after rotating it in the direction
of the arrow in the figure.
|
Installation
| 1. |
Install in the reverse order of removal.
|
Fuel Filler Cap
Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which seals the fuel filler. After the gasket
on the fuel filler cap an ...
See also:
Specifications
Description
Specifications
Limit
General
Type
In-line, DOHC
Number of cylinders
4
...
Accelerator Pedal Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
Reassembly
•
Thoroughly clean all parts to be assembled.
•
...
Copyright © www.kirmanual.com 2014-2024