Kia Rio: Hands free switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
|
| 3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 4. |
Remove 2 screws on the steering wheel.
|
| 5. |
Remove the steering wheel cover (A) after loosening 6 screws.
|
| 6. |
Remove the hands free switch.
|
Hands free switch Inspection
1.
Check the hands free remote control switch for resistance between
No.4 and No.5 terminals in each switch position.
Audio + Bluetooth [LH]
...
Hands free switch Installation
1.
Reassemble the hands free switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reasse ...
See also:
Side Airbag (SAB) Module Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace the seat back assembly when replacing the ...
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston
pos ...
LCD display warning (if equipped)
For vehicle’s equipped with smart key system
Key is not in vehicle
If the smart key is not in the vehicle and if any door is opened or closed with
the engine start/stop button in the ACC, ON, or ...
Copyright © www.kirmanual.com 2014-2024