Kia Rio: Hazard Lamp Switch Installation

Hazard Lamp Switch Removal

1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or trim remover, remove the hazard lamp switch (A). ...

Hazard Lamp Switch Inspection

1. Operate the switch and check for continuity between terminals. ...

See also:

Components Location
1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter (LDC) 5. ISG OFF Switch 6. Alternator 7. Starter 8. Brake s ...

Specification
HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) ...

Flat tire
Jack and tools The spare tire, jack, jack handle and wheel lug nut wrench are stored in the luggage compartment. Remove the luggage under tray out of the way to reach the equipment. (1) Jack ha ...