1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the head lamp assembly (Refer to the head lamp).
|
3. |
Remove the head lamp leveling actuator by turning the adjusting
gear in the hole using the adjusting wheel or screw driver.
|
Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.275 ~ 0.475
W.O.T
3.8 ~ 4.4
1.75 ~ 2.35 ...
Ignition Switch Assembly Installation
1.
Install the key lock cylinder.
When assembling, the key must be insert ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...