1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Remove the crash pad side switch assembly.
|
4. |
Disconnect the head lamp leveling switch connector from lower
crash pad switch.
|
5. |
Remove the head lamp leveling switch.
|
6. |
The installation is the reverse of removal.
|
Circuit Diagram
(M/T)
(A/T)
...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by signal from control unit. Pressing the intake selection switch will
shift between recirculation and fresh ai ...
Smart key unit Removal
Smart key unit
[USA]
1.
Disconnect the negative(-) battery terminal.
2.
Remove the smart key unit (A) after disconnecting the c ...