Kia Rio: Head Lamps Installation

Head Lamps Removal

Head Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the radiator grille upper cover (A), after loosening the mounting ...

Head Lamps Adjustment

Head Lamp Aiming Instructions The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions. ...

See also:

TPMS Receiver Description
1. Mode (1) Virgin State A. The receiver as a sole part is shipped in this state. ...

Components Location
1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Canister close valve (CCV) 6. Fuel level sensor (FLS) 7. ORV ...

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.85 ~ 1.3) 0.0335 ~ 0.0512 Output volt ...