Kia Rio: Heater & A/C Control Unit (MANUAL) Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the heater & A/C controller (A) from the center facia using
a flat-head screwdriver or remover.
|
| 3. |
Disconnect the connectors (A).
|
| 4. |
Install in the reverse order of removal.
|
Heater & A/C Control Unit (FATC) Components
Connector Pin Function
Connector
Pin No
Function
Connector
Pin No
Function
A
1
IGN 2
B
17
HI-SCAN (K-L ...
See also:
Installation
1.
Installation is the reverse of removal.
If the oil seal on the transaxle case side is da ...
Seat Belt Switch Installation
1.
Install is reverse of removal.
...
CVVT (Continuously Variable Valve Timing) System: Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...
Copyright © www.kirmanual.com 2014-2024