1. |
Disconnect the battery nagative terminal.
|
2. |
Remove the engine cover.
|
3. |
Disconnect the ignition coil connector (A).
|
4. |
Remove the ignition coil (A).
|
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance ...
Spark Plug: Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
Installation
Installation is in the reverse order of removal.
Perform the following :
•
Adjust a shift cable.
•
Refill engine with engine oil.
...