Kia Rio: Inhibitor Switch Removal
| 1. |
Place the shift lever into the "N" position.
|
| 2. |
Remove the air cleaner assembly.
|
| 3. |
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
|
| 4. |
Disconnect the inhibitor switch connector (A).
|
| 5. |
Remove the shift cable mounting nut (B).
|
| 6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
| 7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Inhibitor Switch Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
See also:
Immobilizer Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...
Compressor Oil Specification
1.
The HFC-134a system requires synthetic compressor oil (PAG) whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
Before driving
Before entering vehicle
Be sure that all windows, outside mirror(s), and outside lights are clean.
Check the condition of the tires.
Check under the vehicle for any sign of leaks.
Be sure th ...
Copyright © www.kirmanual.com 2014-2024