Kia Rio: Inspection

Horn Inspection

Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal.

1 : 12V Ground(-)

2 : 12V (+)

The horn should make a sound. If the horn fails to make a sound, replace it.

Component Location

1. Horn switch 2. Horn relay (Egine Room Relay) 3. Horn 4. Clock spring ...

Removal

1. Remove the under cover. 2. Remove the mounting nut and disconnect the horn connector, then remove the horn (A). ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

Description
Limitations Of The Navigation system GPS Signal Reception State As the GPS satellite frequency is received/transmitted in straight lines, reception may not work if something is placed on ...

Signal Waveform
...