Kia Rio: Inspection - Cooling System - Engine Mechanical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Inspection

1.
Immerse the thermostat in water and gradually heat the water.


2.
Check the valve opening temperature.

Valve opening temperature : 82±1.5°C (179.6±2.7°F)
Full opening temperature : 95°C (203°F)

If the valve opening temperature is not as specified, replace the thermostat.
3.
Check the valve lift.

Valve lift : 8mm(0.3in) or more at 95°C (203°F)

If the valve lift is not as specified, replace the thermostat.
Thermostat: Removal
   Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. ...

Thermostat: Installation
1. Place the thermostat in the block. Install the thermostat (B) with the jiggle valve upward. 2. Install the water inlet fitting (A). ...

See also:

Defroster
CAUTION - Conductors To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ...

Special Service Tools
Item Illustration Application Fuel Pressure Gauge (09353-24100) Measuring the fuel line pressure Fuel Pressure Gauge Adapte ...

ESC Operation Mode
ESC Hydraulic System Diagram 1. ESC Non-operation : Normal braking. Solenoid valve Continuity Valve Motor ...

Copyright © www.kirmanual.com 2014-2024