1. |
Turn the ignition switch OFF.
|
2. |
Remove the ECTS (Refer to "Removal").
|
3. |
After immersing the thermistor of the sensor into engine coolant,
measure resistance between the ECTS terminals 3 and 4.
|
4. |
Check that the resistance is within the specification.
|
Valve Body Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...
Installation
•
Install the component with the specified torques.
•
...
AVN Head Unit Installation
AVN Head Unit
1.
Connect the AVN head unit connectors and cable.
2.
Install the AVN head unit.
3.
Install t ...