1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the fuel pressure regulator valve connector.
|
3. |
Measure resistance between the fuel pressure regulator valve terminals
1 and 2.
|
4. |
Check that the resistance is within the specification.
|
Removal
•
DON’T remove the camshaft position sensor while the engine
is running or right after e ...
Room Lamp Inspection
Room Lamp
Remove the room lamp assembly then check for continuity between terminal.
If the continuity is not as specified, replace the room lamp assemlby.
...
Signal Waveform
...