Kia Rio: Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
After installing, bleed the brake system.
(Refer to Brake system bleeding)
|
| 3. |
Adjust the brake pedal height and free play.
(Refer to Brake pedal height and free play adjustment)
|
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check va ...
Master Cylinder
...
See also:
Filler-Neck Assembly Installation
1.
Installation is reverse of removal.
Filler-neck assembly bracket
installation nut :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...
Disassembly
1.
Remove the rear cover (A) after removing nuts.
2.
Remove the mounting bolts (A) and the brush holder assembly (B).
...
Head lamp leveling Actuator Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the head lamp assembly (Refer to the head lamp).
3.
...
Copyright © www.kirmanual.com 2014-2024