1. |
Installation is the reverse of removal.
|
2. |
Use a SST (09581-11000) when installing the brake caliper assembly.
|
3. |
After installation, bleed the brake system.
(Refer to Brake system bleeding)
|
Instrument panel overview
1. Instrument cluster
2. Horn
3. Driver’s front air bag
4. Light control/Turn signals
5. Wiper/Washer
6. Ignition switch or ENGINE START/ STOP button
7. Hazard warning flasher switch
8. Audio ...
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp lens (B).
3.
After ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by signal from control unit. Pressing the intake selection switch will
shift between recirculation and fresh ai ...