Kia Rio: Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Climate Control Air Filtar Replacement

1. Open the glove box. 2. Remove the filter cover (A) by pressing the knob. 3. Replace the air filter ( ...

Intake Actuator Inspection

1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Start/Stop Button Installation
1. Install the start/stop button. 2. Install the Audio. ...

Adjustment
Clutch Release Cylinder Air Bleeding Procedure    Use the specified fluid. Avoid mixing different brands of flu ...

Rain Sensor Removal
   The rain sensor may not operate properly if contaminated. Protect the rain sensor surface by not removing the cover unti ...