Kia Rio: Intake Actuator Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad.
(Refer to BD group - "Crash Pad")
|
| 3. |
Remove the side bracket (A).
|
| 4. |
Disconnect the connector (A) and then remove the intake actuator
(B) after loosening the mounting screws.
|
| 5. |
Install in the reverse order of removal.
|
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Controller
...
See also:
Components
1. Brake pedal member assembly
2. Stop lamp switch
3. Pedal bushing
4. Return spring
5. Brake pedal
6. Brake pedal pad
...
Side Impact Sensor (SIS) Components
...
TPMS Sensor Replacement
Repair tire after using the Tire Mobility
Kit (TMK)
When the TPMS warning lamp OFF
1.
Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to ...
Copyright © www.kirmanual.com 2014-2024