1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Remove the air duct and the air cleaner assembly.
(Refer to Engine and transaxle assembly)
|
4. |
Disconnect the injector extension connector (A), the VIS (Variable
intake system) connector (B) and the PCSV (Purge control solenoid valve)
connector (C).
|
5. |
Disconnect the ETC (Electronic throttle control) connector (A)
and the MAPS (Manifold absolute pressure sensor) & IATS (Intake air
temperature sensor) connector (B).
|
6. |
Disconnect the knock sensor connector (A).
|
7. |
Disconnect the PCV (Positive crankcase ventilation) hose (A) and
the PCSV (Purge control solenoid valve) hose (B).
|
8. |
Disconnect the vacuum hose (A) and the throttle body coolant hoses
(B).
|
9. |
Unfasten the filler neck assembly mounting bolts (A).
|
10. |
Remove the intake manifold (A) with the gasket (B).
|
11. |
Installation is reverse order of removal.
|
Installation
1.
Installation is the reverse of removal.
2.
Use a SST (09581-11000) when installing the brake caliper assembly.
3 ...
If you have a flat tire (Tire mobility kit, if equipped)
For safe operation, carefully read and follow the instructions in this manual
before use.
(1) Compressor
(2) Sealant bottle
The Tire Mobility Kit is a temporary fix to the tire and the tire sho ...
Removal
1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~79.6 lb-ft)
...