1. |
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
|
2. |
Remove the ISG switch (A) from the switch assembly.
|
3. |
Check the continuity between the switch 2 and 3 terminals as the
ISG OFF switch is engaged.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
...