1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the license lamp lens by pushing the clip (A).
|
3. |
Replace the lamp bulbs (B) after turning the socket in the counter
clock-wise direction from lens (A).
|
TPMS Receiver Description
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
Engine oil
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes ...
Adjustment
Battery Sensor Recalibration Procedure
If disconnecting the negative (-) battery cable from the battery during
repair work for the vehicle equipped with Alternator Managing Syst ...