1. |
Basically, all measurements in this manual are taken with a tracking
gauge.
|
2. |
When a measuring tape is used, check to be sure there is no elongation,
twisting or bending.
|
3. |
For measuring dimensions, both projected dimensions and actual
- measurement dimensions are used in this manual.
|
Adjustment
Battery charging
In general, vehicle battery charging system has three forms.
1.
Constant current charge: The battery voltage gradually rises by
chargi ...
Power Out Side Mirror Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
...
Front Stabilizer Bar Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the front stabilizer bar for deformation.
3.
Check th ...