|
1. |
Using a screwdriver or remover, remove the outside rear view mirror
cover (A).
|
2. |
After loosening the mounting bolts, then remove the outside rear
view mirror (A).
|
3. |
Disconnect the outside rear view mirror connector (A).
|
4. |
Installation is the reverse of removal.
|
1. |
Loosen the mounting screw (C).
|
2. |
Push the inside rear view mirror base (B) up to remove to inside
rear view mirror assembly (A).
|
3. |
Installation is the reverse of removal.
|
Engine Number
1.
Engine fuel
- G : Gasoline
2.
Engine range
- 4 : 4 cycle 4 cylinder
3.
Engine developme ...
Fuel Filler Cap
Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which seals the fuel filler. After the gasket
on the fuel filler cap an ...
License Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens by pushing the clip (A).
3.
...