1. |
Check the continuity between the terminal and the body with an
ohmmeter. If there is no continuity, replace the oil pressure switch.
|
2. |
Check the continuity between the terminal and the body when the
fine wire is pushed. If there is continuity even when the fine wire
is pushed, replace the switch.
|
3. |
If there is no continuity when a 49.0kpa (0.5kg/cm², 7.1psi) is
applied through the oil hole, the switch is operating properly.
Check for air leakage. If air leaks, the diaphragm is broken.
Replace it.
|
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Warning / Caution Label Locations
1. Fan caution
2. Radiator cap caution
3. Battery caution
...
Front Seat Components
1 . Headrest
2 . Headrest guide
3 . Front seat back cover
4 . Front seat back warmer
5 . Front seat back pad
6 . Front seat back silener cloth
7 . Front seat back frame as ...