1. |
Remove the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel. (Refer to “Crash pad” in BD
group.)
|
3. |
Remove the oil pump unit connector to the left side of the brake
pedal.
|
4. |
Remove the oil pump unit (A) after removing the nuts (3ea).
|
Input Speed Sensor Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Seat Heater Switch Installation
1.
Install the seat heater switch.
2.
Install the console assembly.
3.
Connect the battery (-) terminal.
...