Kia Rio: On-board Refueling Vapor Recovery (ORVR) valve

Installation

Installation is the reverse of removal. Canister installation bolt/nut: 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...

Removal

1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the ORVR valve (A) after releasing hooks (B). ...

See also:

Front Driveshaft Component
1. Driveshaft (LH) 2. Circlip 3. Circlip 4. Driveshaft (RH) ...

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect igni ...

Removal
   • Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does c ...