Kia Rio: Output Speed Sensor Installation
| 1. |
Installation is the reverse of removal.
|
After replacement or reinstallation procedure of the valve body
assembly, must perform procedures below.
|
Output Speed Sensor Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Torque Converter Control Solenoid Valve (T/CON_VFS) Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque converter.
...
See also:
Ignition Coil: Specification
Item
Specification
Primary Coil Resistance (Ω)
0.75 ± 15％ [20°C (68°F)]
Secondary Coil Resistance (kΩ)
5.9 ± 15％ [20 ...
Anchor Pretensioner (APT) Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the seat belt after pushin ...
LCD display warning (if equipped)
For vehicle’s equipped with smart key system
Key is not in vehicle
If the smart key is not in the vehicle and if any door is opened or closed with
the engine start/stop button in the ACC, ON, or ...
Copyright © www.kirmanual.com 2014-2024