1. |
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
|
2. |
Remove the under cover (A).
|
3. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug. (Refer to "Hydraulic system (Fluid)"
in this group)
|
4. |
Remove the air breather hose (A).
|
5. |
Remove the valve body cover (B).
|
6. |
Remove the plate and the detent spring (A) after removing the
bolt.
|
7. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
8. |
Remove the valve body assembly (A).
|
9. |
Disconnect the input & output speed sensor connector (A).
|
10. |
Remove the input & output speed sensor (B) after removing the
bolts (2ea).
|
35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Heater & A/C Control Unit (FATC) Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
During the self-diagnosis, the corresponding fault code flickers
...
ESC OFF Switch Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged.
...