Kia Rio: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to "Valve Body" in this group)
|
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
SS-A Solenoid Valve(ON/OFF) Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed
at valve body.
...
See also:
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of below items;
-
Fill vent valve
-
...
Heater & A/C Control Unit (FATC) Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
During the self-diagnosis, the corresponding fault code flickers
...
Components Location
[Vehicle Components]
1. Automatic transaxle
2. Transaxle control module (TCM)
3. Shift lever
4. Data Link Connector (DLC)
[Transaxle Components]
...
Copyright © www.kirmanual.com 2014-2024