Kia Rio: Passenger Airbag (PAB) Module Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
|
| 3. |
Disconnect the passenger airbag connector (B) and remove the PAB
mounting bolt (A).
|
| 4. |
Remove the crash pad.
(Refer to the Body group - "Crash pad")
|
| 5. |
Remove the heater duct from the crash pad.
|
| 6. |
Remove the mounting bolts from the crash pad. And then remove
the passenger airbag.
|
Passenger Airbag (PAB) ModuleInstallation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
See also:
Room Lamp Removal
Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove room lamp lens (B).
3.
Remove ...
How to use this manual
We want to help you get the greatest possible driving pleasure from your vehicle.
Your Owner’s Manual can assist you in many ways.We strongly recommend that you read
the entire manual. In order to ...
Copyright © www.kirmanual.com 2014-2024