1. |
Turn the ignition switch ON.
|
2. |
Connect the GDS.
|
3. |
Emit intensive light toward photo sensor using a lamp, and check
the output voltage change.
|
4. |
The voltage will rise with higher intensive light and reduce with
lower intensive light.
|
Removal
1.
Disconnect the battery negative terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
Catalytic Converter
Description
The catalytic converter of the gasoline engine is a three way catalyst.
It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from
the oxides of nitrogen (NOx). ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description
Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the overdrive clutch.
...