1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
3. |
Disconnect the power window switch module connector (A) from the
wiring harness.
|
4. |
Remove the power window switch module (A) from the door trim after
loosening the mounting screws (5EA).
|
Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...
Component Location (1)
1. Interior antenna 1
2. Interior antenna 2
3. Door outside handle
4. Buzzer
5. Smart key unit
6. SSB (Start Stop Button)
...