Kia Rio: Power Door Mirror Actuator Inspection
| 1. |
Remove the front door quadrant delta cover.
(Refer to the BD group - "Front door")
|
| 2. |
Disconnect the power door mirror connector from the harness.
|
| 3. |
Apply battery voltage to each terminal as shown in the table and
verify that the mirror operates properly.
Side Repeater Lamp
Mirror Heater
With Folding Mirror
|
Power Out Side Mirror Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
...
Power Windows
...
See also:
Special Service Tools
Tool
(Number and Name)
Illustration
Use
09200-38001,3N000 (Beam)
09200-1P100, 4X000 (Adapter)
09200-2S200 (Supporter)
Engine support assembly
...
Starter: Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...
Rear Seat Replacement
Rear Seat Assembly Replacement
1.
After loosening the mounting bolt, then remove the rear seat cushion
(A).
Tightening torque :
...
Copyright © www.kirmanual.com 2014-2024