Kia Rio: Power Out Side Mirror Switch Component

Component Location

1. Power door mirror 2. Power door mirror switch 3. Folding mirror switch ...

Power Out Side Mirror Switch Inspection

1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

See also:

Rain Sensor System Function
Basic Principle Emitted Beam from luminosity diode is reflected entirely against the windshield exterior, and then turn into photo diode. If there is water on the windshield exterior, be ...

Rain Sensor Inspection
Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the ...

Head lamp leveling Actuator Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the head lamp assembly (Refer to the head lamp). 3. ...