If a large amount of unburned gasoline flows into the converter,
it may overheat and create a fire hazard. To prevent this observe the
following precautions and explain them to your customer.
|
1. |
Use only unleaded gasoline.
|
2. |
Do not run the engine while the car is at rest for a long time.
Avoid running the engine at fast idle for more than 10 minutes and idle
speed for more than 20 minutes.
|
3. |
Do not measure engine compression for an extended time. Engine
compression tests must be made as rapidly as possible. Remove the fuel
pump relay before performing a compression test.
|
4. |
Do not dispose of used catalytic converter together with parts
contaminated with gasoline or oil.
|
Photo Sensor (FATC only) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from
the center of defrost no ...
Operation
1.
Vehicle moving.
2.
The transmission lever position is D-range. The brake pedal is
released.
3.
The ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...