Kia Rio: Radiator: Specifications
| Item |
Specification |
|
| Non - Air conditioning type |
Air conditioning type |
|
| Fan type |
PULLER |
|
| Fan speed control |
Resistor (On-Off) |
Resistor (Hi-Low-Off) |
| Air flow rate [m³/h (yd³/h)] |
1,650 (2,158) -10% min. |
2,000 (2,616) -10% min. |
| Fan speed (rpm) |
1,600 ±10% |
2,000 ±10% |
| Current (A) |
10.0 +10% max. |
15.0 +10% max. |
Radiator: Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A ...
See also:
Specification
Item
Specification
Coil resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]
...
Radiator: Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
(-) terminal (without battery sensor):
7.8 ~ 9.8N.m (0.8 ~ 1.0 ...
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...
Copyright © www.kirmanual.com 2014-2024