Rain sensor consist of two luminosity diode, two photo diode,
optic fiber and coupling pad.
|
• |
Contamination of the measurement surface.
|
• |
Air bubbles between the windshield and the coupling pad contact
surface.
|
• |
The movement of coupling pad by vibration.
|
• |
Damaged wiper blade.
|
In case that the rain sensor doesn't work or malfunction, it is
needed manual wiper switch operation by the driver.
|
Rear Hub - Carrier Replacement
[Drum Type]
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Trunk
Opening the trunk
With the trunk lid release lever To open the trunk from inside the vehicle, pull
up the trunk lid release lever.
The trunk will automatically lock when the trunk lid closes.
& ...
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacin ...