Kia Rio: Rear Shock Absorber Inspection
| 1. |
Check the components for damage or deformation.
|
| 2. |
Compress and extend the piston and check that there is no abnormal
resistance or unusual sound during operation.
|
Rear Shock Absorber Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Rear Coil Spring Components
1. Spring upper pad
2. Spring
3. Spring lower pad
...
See also:
Audio Unit Description
Introduction to CD
•
If the temperature inside the car is too high, open the car windows
for ventilation before using your car audio.
•
It is ...
Antenna Coil Installation
1.
Install the antenna coil.
2.
Connect the antenna coil connector.
3.
Install the crash pad lower panel.
...
Removal
1.
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
2.
Remove the ORVR valve (A) after releasing hooks (B).
...
Copyright © www.kirmanual.com 2014-2024