1. |
Remove the rear wheel & tire.
|
2. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle (B).
|
3. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt.
|
4. |
Installation is the reverse of removal.
|
Installation
•
Install the component with the specified torques.
•
...
Foot Actuator (With Auto Defogging System) Description
The foot actuator is located at the heater unit. It adjusts position of
the foot door in heater unit of the vehicle equipped with the auto defogging
system. ...
Audio Unit Components
Terminal specification(PA30A)
No
Terminal Description
Condition
Specified Condition
A1
Loudspeaker Rear Left+
Needed connection to the ca ...