Kia Rio: Rear Wiper Motor Removal
| 1. |
Detach the wiper cap (A) and remove a nut (B).
|
| 2. |
Remove the rear wiper arm & blade (A).
|
| 3. |
Remove the rubber packing (A).
|
| 4. |
Open the tailgate then remove the tailgate trim.
(Refer to the BD group - "Tail gate")
|
| 5. |
Disconnect the rear wiper motor connector (A) then remove the
rear wiper motor (B) after removing 3 bolts.
|
Component Location
1. Head cap
2. Nut
3. Rear wiper arm & Blade
4. Packing (rubber)
5. Rear wiper motor assembly
6. Bolt
...
Rear Wiper Motor Installation
1.
Install the rubber packing.
2.
Install the rear wiper motor assembly.
Tightening torque :
6.86 ~ 9.81N ...
See also:
Audio Remote Control Inspection
1.
Check the audio remote control switch (A) for resistance between
No.5 and No.7 terminals in each switch position.
Switch
Connect ...
Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder assembly
...
Manual climate control system
1. Fan speed control knob
2. Mode selection knob
3. Temperature control knob
4. Air conditioning button (if equipped)
5. Rear window defroster button
6. Air intake control button
Heating and a ...
Copyright © www.kirmanual.com 2014-2024