1. |
Remove the condenser.
|
2. |
Remove the cap (B) on the bottom of the condenser with L wrench
(A).
|
3. |
Remove the desiccant (A) from condenser using a long nose plier.
Check for crumbled desiccant and clogged bottom cap filter.
|
4. |
Apply air conditioning compressor oil along the O-rings and threads
of the new bottom cap.
|
5. |
Insert the new desiccant into the receiver drier tank. The desiccant
must be sealed in vacuum before it is exposed to air for use.
|
6. |
Install the new bottom cap to the condenser.
|
Engine Oil: Oil And Filter Replacement
•
Prolonged and repeated contact with mineral oil will result
in the removal of natural ...
Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the F ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA ...