1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the connectors from the fuse side of the interior junction
box.
|
4. |
Remove the interior junction box(A) after loosening the mounting
nuts (2EA).
|
5. |
Disconnect the connectors from the back side of the smart junction
box.
|
General
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute
Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air tem ...
Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the F ...