1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the connectors and remove the BCM (A) after loosening
the nut and the bolt.
|
TPMS Sensor Installation
Sensor Fit
•
Handle the sensor with care.
•
...
Installation
•
Install the component with the specified torques.
•
...
Manual Transaxle Removal
1.
Remove the following items;
A.
Air cleaner assembly (A) and air duct (B) .
(Refer to "Intake and Exhaust system" ...