Kia Rio: Removal
| 1. |
Remove the cyliner head cover.
(Refer to Timing System)
|
| 2. |
Remove the timing chain cover.
(Refer to Timing System)
|
| 3. |
Remove the timing chain.
(Refer to Timing System)
|
| 4. |
Remove the exhaust oil control valve (OCV) adapter (A).
|
| 5. |
Remove the camshaft bearing caps (A) with the order below and
then detach the intake camshaft and exhaust camshaft.
|
| 6. |
Remove the intake CVVT assembly (A) and exhaust CVVT (B).
|
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Inspection
Camshaft Assembly
1.
Inspect the cam height.
Using a micrometer, measure the cam height.
Cam height
Intake : 44.15mm (1.7382in ...
See also:
26 Brake Control Solenoid Valve(26/B_VFS) Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 26 brake.
...
Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body group - "Floor console")
2.
Ap ...
Starter: Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air duct and air cleaner assembly. (Refer to EM group)
3.
...
Copyright © www.kirmanual.com 2014-2024