Kia Rio: Removal
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove the cable from alternator "B" terminal (C).
|
| 3. |
Loosen the mounting bolts, and then turn the adjusting bolt (A)
clockwise to loosen tension.
|
| 4. |
Remove the drive belt (A).
|
| 5. |
Remove the alternator (A) after remove the mounting bolts.
|
Circuit Diagram
...
Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine charging Sy ...
See also:
5Door Side Body A
Front side member tooling hole (Ø12)
Fender apron upper member tooling hole (Ø12)
Front door upper hing ...
Turn Signal Lamp (Door mirror) Installation
Door Mirror Turn Signal Lamp
1.
Install the door mirror turn signal lamp to the door mirror.
2.
Install the door mirror.
...
Electric Oil Pump: Description
This transaxle has a standard Mechanical Oil Pump (MOP) linked to the
input shaft to generates oil pressure when input shaft rotates.
But, this transaxle equipped with ISG system also has ...
Copyright © www.kirmanual.com 2014-2024