1. |
Disconnect the battery terminal (A).
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
3. |
Remove the battery mounting bracket and the insulation pad (A),
and then remove the battery(B).
|
4. |
Disconnect the ECM connector (A), and then remove ECM (B) after
removing the bolts/nut.
|
5. |
Remove the battery tray (C) after removing the bolts.
|
Front Door Replacement
Front Door Trim Replacement
•
Take care not to scratch the door trim and other parts.
...
Auto Light Sensor Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
26 Brake Control Solenoid Valve(26/B_VFS) Circuit Diagram
...