1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Lift the vehicle.
|
3. |
Remove the fuel tank.
(Refer to Engine Control/Fuel System - "Fuel Tank")
|
4. |
Disconnect the vapor tube quick-connector (A) and the vapor hose
(B).
|
5. |
Remove the canister assembly after removing installation bolts
(C).
|
Circuit Diagram
(M/T)
(A/T)
...
Manual Transaxle Components
1. Transaxle support mounting bracket
2. Control shaft complete
3. Back up lamp switch
4. Vehicle speed sensor
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV termina ...