Kia Rio: Removal
| 1. |
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
|
| 2. |
Remove the ORVR valve (A) after releasing hooks (B).
|
Installation
1.
Install in the reverse order of removal.
...
See also:
Rear Hub - Carrier Replacement
[Drum Type]
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Air bag collision sensors
(1) SRS control module
(2) Front impact sensor
(3) Side impact sensor
WARNING - Air bag sensors
Do not hit or allow any objects to impact the locations where air bag
or sensors are installed ...
Installation
Multifunction Switch
1.
Install the multifunction switch.
2.
Install the clock spring.
3.
Install the steer ...
Copyright © www.kirmanual.com 2014-2024