Kia Rio: Removal
When replacing the ECM, the vehicle equipped with immobilizer
must be performed the procedure as below.
[In the case of installing used ECM]
Then the ECM key register process is completed automatically.
[In the case of installing new ECM]
Then the ECM key register process is completed automatically.
|
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Disconnect the ECM Connector (A).
|
| 3. |
Remove the battery (Refer to "Charging System" in EM group).
|
| 4. |
Remove the mounting bolts and nut, and then remove the ECM bracket
assembly (A).
|
Circuit Diagram
(M/T)
(A/T)
...
Installation
When replacing the ECM, the vehicle equipped with immobilizer
must be performed the procedure as below.
...
See also:
AVN Head Unit Removal
AVN Head Unit
•
Take care not to scratch the center fascia panel and related
parts.
...
Low brake fluid level warning
If the warning light remains on, it may indicate that the brake fluid level in
the reservoir is low.
If the warning light remains on:
1.Drive carefully to the nearest safe location and stop your v ...
Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...
Copyright © www.kirmanual.com 2014-2024