1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the variable intake solenoid valve connector (A).
|
3. |
Disconnect the vacuum hoses (B) from the valve.
|
4. |
Remove the installation bolt, and then remove the valve (C) from
the surge tank.
|
Transaxle Control Module (TCM) Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side c ...
Inspection
1.
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube
A ...
Specifications, Consumer information and Reporting safety defects
Engine
Dimensions
Bulb wattage
■ 5 door
■ 4 door
Tires and wheels
Weight/volume
Recommended lubricants and capacities
To help achieve proper engine and powert ...